Higher KVA Inverters
Best Suitable for Shopping Malls, Hospitals, IT Sectors, BPO's Buildings
Features & Protection
- Pure sine wave
- High efficiency
- Regulated output
- Suitable for 3 phase unbalanced load
- Low harmonic distortion
- Designed for high inductive load
- IGBT based PWM technology
Specifications of Higher Rating Inverters
|
|
|
SinglePhase Input/single phase Output
|
Three-Phase input/Three phase output
|
INPUT
|
Capacity
|
15KVA TO 50 KVA
|
15 KVA TO 150 KVA
|
AC
|
170V to 270V AC
|
320V to 470V AC
|
DC Voltage
|
180VDC For 15/20 KVA. 360 VDC above 20KVA
|
360VDC
|
Frequency
|
50Hz + 10%
|
|
OUTPUT
|
Technology
|
IGBT based
|
Output Voltage
|
230V AC Single Phase
|
400V / 415V AC Three Phase
|
Voltage Regulation
|
+ 2% Maximum
|
Frequency
|
50Hz + 0.1Hz
|
Waveform
|
PWM Sine Wave
|
Harmonic Distortion
|
Less than 3% on linear load
|
Inverter Efficiency
|
> 93% for 360 VDC and above >90% for 180 VDC
|
Power Factor
|
0.8
|
Overload
|
125% for 5 Minutes 150% for 60 sec
|
Crest Factor
|
3:1
|
Transient Response
|
+ 4% under full load change and corrected within 5 cycles.
|
Phase Displacemen /td>
|
|
120 Degree +/- 1 Degree
|
Audible Noise
|
Less than 45 dB 1 Meter
|
|
METERING
|
Microprocessor Based Digital LCD Meter
|
Out Voltage, Output current & Frequency, DC Voltage, Battery and Load Percentage
|
R, Y, B, Output voltage, Output current & Frequency, DC Voltage, Battery and
Load Percentage
|
CHANGE - OVER
|
Static Switch
|
Bi-directional
|
Manual bypass
|
Provided
|
ISOLATION OF POWER
|
Input
|
MCB Provided for charger
|
Battery
|
HRC Fuse
|
|
Indiaction & Alarms
|
Mains On
|
Indication
|
Inverter On
|
Indication
|
MainMains Fail
|
Indication & Alarm
|
DC Low
|
Indication
|
Fault
|
Indication
|
Output Overload
|
Indication
|
|
ENVIRONMENTAL
|
Operating Temperature
|
0 Deg. to 50 Deg. C
|
Humidity
|
Max 95 %, Non -Condensing
|
|
PROTECTIONS
|
Output Overload & Short circuit, Under & Over Voltage, DC Under & Over
voltage input Under & Over voltage, Single Phasing & Phase unbalance (for
3 - Ph Input only)
|
*Due to Continuous Product improvements,specs are subject to change without notice.
|
Luminous Solar Products
These are high quality and high performance modules suitable for power generation
and tested visually, mechanically and electrically according to the standard test
conditions applicable worldwide.
Continue Reading »
Solar For Home
The innovative, energy efficient LED based design of this new product with
a single light output is at par with 11W CFL. It can be termed as single solution
for all daily household lighting needs. This equipment has PWM based compact electronic
circuitry with high efficiency.
It offers uniform & constant bright light output over entire battery voltage
range. It is specially designed for maximum energy harvesting from connected solar
module, as compared to other products. This equipment can provide light output ranging
between 11 to 102 hrs.
Enquire Solar Battery »
Solar Battery
Solar flooded tubular monobloc batteries designed to offer reliable, consistent
and low maintenance power for renewable energy requirements. These batteries can
be subject to deep cycle applications and minimum maintenance in rural and power
deficit areas.
The batteries have a capacity to withstand partial state of charge (PSOC) operation.
These monobloc batteries are available in 12 Volts from 20Ah to 200 Ah @ C10 at
27⁰C to 1.80 vpc.
Enquire Solar Battery »